Palomar Adivive Fat Transfer System
$5,829.00
$5,829.00
per item
Autologous fat transfer isn't new. But the Adivive™ Fat Transfer System's approach to the procedure certainly is. That's because Adivive is an all-in-one, integrated system that uses a unique filtering mechanism and high G-force centrifugation to yield a higher quality of adipose tissue for re-injection. The result? Higher graft volume survival and more predictable outcomes without the need to overfill as with traditional fat transfer techniques.
Traditional fat transfer technologies require more manual work for you and potentially multiple systems to harvest, process, and re-inject autologous adipose tissue. The Adivive system simplifies the amount of equipment needed and streamlines each process of the procedure from infiltration all the way through the actual transfer. Additionally, Adivive allows the use of your own preferred cannulas if you choose and transfer of tissue to standard syringes for smaller area injection, via special adapters that are available for use with the Adivive system.
When you're ready to add a fat transfer system to your aesthetic practice, you're ready for the Adivive Fat Transfer System, providing you with in-demand technology for predictable and dramatic outcomes to benefit a medical practice and patients.
The Adivive Fat Transfer System is manufactured by Medi-Khan. Adivive Fat Processing Units (FPU's) are sold by Palomar.
Benefits of Adivive
All-in-one system for infiltration, harvesting, centrifugation, and fat transfer/re-injections
Closed-circuit system, providing aseptic procedures that reduce the risk of contamination
Exclusive weighted-mesh piston filtering system that improves the separation of fluids such as blood, infiltration fluids, and free oils
Offers high G-force/RPM centrifugation that yields highly concentrated adipose tissue for injection
Adivive Specifications
Dimensions: 445 mm (W) x 540 mm (L) x 350 mm (H)
Net Weight: 35 kg/77 lbs.
Rated Voltage & Frequency: Single Phase 110 V/60 Hz +/- 10%
Electrical Requirement: 500 W
Maximum Vacuum Pressure: 90 kPa (-680mmHg), 13.151 PSI, 0.965 Bar
Maximum Air Pressure: 1 Kg f/cm²
Maximum RPM: 5,500 RPM
Minimum RPM: 400 RPM
Centrifuge Radius: 187.50 cm (when fully outreached)
Traditional fat transfer technologies require more manual work for you and potentially multiple systems to harvest, process, and re-inject autologous adipose tissue. The Adivive system simplifies the amount of equipment needed and streamlines each process of the procedure from infiltration all the way through the actual transfer. Additionally, Adivive allows the use of your own preferred cannulas if you choose and transfer of tissue to standard syringes for smaller area injection, via special adapters that are available for use with the Adivive system.
When you're ready to add a fat transfer system to your aesthetic practice, you're ready for the Adivive Fat Transfer System, providing you with in-demand technology for predictable and dramatic outcomes to benefit a medical practice and patients.
The Adivive Fat Transfer System is manufactured by Medi-Khan. Adivive Fat Processing Units (FPU's) are sold by Palomar.
Benefits of Adivive
All-in-one system for infiltration, harvesting, centrifugation, and fat transfer/re-injections
Closed-circuit system, providing aseptic procedures that reduce the risk of contamination
Exclusive weighted-mesh piston filtering system that improves the separation of fluids such as blood, infiltration fluids, and free oils
Offers high G-force/RPM centrifugation that yields highly concentrated adipose tissue for injection
Adivive Specifications
Dimensions: 445 mm (W) x 540 mm (L) x 350 mm (H)
Net Weight: 35 kg/77 lbs.
Rated Voltage & Frequency: Single Phase 110 V/60 Hz +/- 10%
Electrical Requirement: 500 W
Maximum Vacuum Pressure: 90 kPa (-680mmHg), 13.151 PSI, 0.965 Bar
Maximum Air Pressure: 1 Kg f/cm²
Maximum RPM: 5,500 RPM
Minimum RPM: 400 RPM
Centrifuge Radius: 187.50 cm (when fully outreached)
SKU:
